Static pressure

From AMS Glossary
Jump to: navigation, search


static pressure

In engineering fluid mechanics, the pressure in a homogeneous incompressible fluid in steady flow along a level streamline at points other than the stagnation point.

Thus if p is the static pressure, Bernoulli's equation gives
ams2001glos-Se61
where ρ is the density of the fluid, V the speed, and p1 the pressure at the stagnation point, called the total pressure. The kinetic energy per unit volume (1/2)ρV2 is
also called the dynamic pressure. The static pressure is that measured by a barometer moving with the fluid. Since the static pressure is the pressure in the moving fluid and is distributed along the streamline exactly as the hydrodynamic pressure, the terminology is most unfortunately chosen. Since it is rigorously defined only when Bernoulli's equation applies, meteorologists do well in avoiding the term. The unqualified term "pressure" is quite satisfactory in this connection. However, the instrumental precautions taken in measuring the static pressure in fluid mechanics must also be applied to meteorological barometers so that it is the pressure and not the wind speed that is being measured. The measured meteorological pressure is in approximate hydrostatic equilibrium because of the relatively small vertical accelerations in the atmosphere, but this condition does not ordinarily obtain in those studies in which the concept of static pressure is used. Thus static pressure and hydrostatic pressure must be distinguished.

Personal tools
Namespaces
Variants